Synovial Fluid Analysis
Also known as:Joint Fluid Analysis
Formal name:Synovial Fluid Analysis
Related tests:Glucose Tests, Uric Acid, Gram Stain, Susceptibility Testing, White Blood Cell Count, Red Blood Cell Count, AFB Testing, Body Fluid Analysis, Rheumatoid Factor, Cyclic Citrullinated Peptide Antibody
All content on Lab Tests Online has been reviewed and approved by our Editorial Review Board.
Why Get Tested?
To help diagnose the cause of joint inflammation, pain, and/or swelling
When to Get Tested?
When one or more of your joints are swollen, red, and/or painful
A synovial fluid sample is obtained by inserting a needle into the space between the bones at a joint
Test Preparation Needed?
Consult with your healthcare provider; synovial fluid collection and analysis may be performed after fasting or at random.
How is it used?
Synovial fluid analysis may be ordered to help diagnose the cause of joint inflammation, pain, swelling, and fluid accumulation. Diseases and conditions affecting one or more joints and the synovial fluid can be divided into four main categories:
- Infectious diseases - those caused by bacteria, fungi, or viruses. They may originate in the joint or spread there from other places in the body. These conditions include acute and chronic septic arthritis.
- Bleeding - bleeding disorders and/or joint injury can lead to blood in the synovial fluid. This is commonly present in people with untreated blood clotting disorders such as hemophilia or von Willebrand disease.
- Inflammatory diseases -
- Conditions that cause crystal formation and accumulation such as gout (needle-like uric acid crystals) and pseudogout (calcium pyrophosphate dihydrate crystals). These typically affect the feet and legs.
- Conditions that cause joint inflammation, such as synovitis, or other immune responses. These may include autoimmune disorders such as rheumatoid arthritis and lupus.
- Degenerative diseases - such as osteoarthritis
When is it ordered?
Synovial fluid analysis may be ordered when a healthcare practitioner suspects that a person has a condition or disease involving one or more of their joints. It may be ordered when someone has some combination of the following signs and symptoms:
- Joint pain
- Redness over the joint
- Joint inflammation and swelling
- Synovial fluid accumulation
It may sometimes be ordered to monitor a person with a known joint condition.
What does the test result mean?
Synovial fluid usually contains a small amount of glucose and protein and may have a few white blood cells (WBCs) and red blood cells (RBCs).
There are a variety of joint abnormalities, including osteoarthritis, rheumatoid arthritis, gout, and infection (septic arthritis), that can cause inflammation, swelling, an accumulation of synovial fluid, and sometimes bleeding into one or more joints. These conditions can limit mobility and, if left untreated, may permanently damage the joints.
Results of tests performed on a sample of synovial fluid may include:
Physical characteristics - the normal appearance of a sample of synovial fluid is usually:
- Straw colored
- Moderately viscous - drops of it from a syringe needle will form a "string" a few inches long.
Changes in the physical characteristics may provide clues to the disease present, such as:
- Less viscous fluid may be seen with inflammation.
- Cloudy synovial fluid may indicate the presence of microbes, white blood cells, or crystals.
- Reddish synovial fluid may indicate the presence of blood, but an increased number of red blood cells may also be present in cloudy synovial fluid.
An individual's joint may be affected by more than one of these physical changes at a time.
Chemical tests - tests that may be performed on synovial fluid samples include:
- Glucose–typically a bit lower than blood glucose levels; may be significantly lower with joint inflammation and infection.
- Protein–increased with bacterial infection
- Uric acid–increased with gout
Microscopic examination - Normal synovial fluid has small numbers of white blood cells (WBCs) and red blood cells (RBCs) but no microbes or crystals present. Laboratories may examine drops of the synovial fluid and/or use a special centrifuge (cytocentrifuge) to concentrate the fluid's cells at the bottom of a test tube. Samples are placed on a slide, treated with special stain, and an evaluation of the different kinds of cells present is performed.
- Total cell counts–number of WBCs and RBCs in the sample; increased WBCs may be seen with infections and with conditions such as gout and rheumatoid arthritis.
- A WBC differential determines the percentages of different types of WBCs. An increased number of neutrophils may be seen with bacterial infections. Greater than 2% eosinophils may suggest Lyme disease, parasitic arthritis, rheumatoid disease, or tubercular arthritis.
- Synovial fluid is evaluated under polarized light to recognize the presence of crystals and to distinguish the types of crystals that are present. Needle-like monosodium urate crystals are associated with gout and calcium pyrophosphate crystals are associated with pseudogout.
Infectious disease tests - in addition to chemistry tests, other tests may be performed to look for microbes if infection is suspected.
- Gram Stain allows for the direct observation of bacteria or fungi under a microscope. There should be no microbes present in synovial fluid.
- Culture and Susceptibility Testing is ordered to determine what type of microbes are present. If bacteria are present, susceptibility testing against certain antibiotics can be performed to guide antimicrobial therapy. If there are no microbes present, it does not rule out an infection; they may be present in small numbers or their growth may be inhibited because of prior antibiotic therapy.
- Other tests for infectious diseases that are less commonly ordered include AFB Testing. This test for the presence of mycobacteria may help diagnose tuberculosis. Molecular test methods for Mycobacteria tuberculosis are more sensitive and specific than traditional cultures and may also be performed.
Is there anything else I should know?
A blood or urine Uric Acid or blood glucose test may be ordered to compare concentrations with those in the synovial fluid. If a healthcare practitioner suspects that an individual has a systemic infection, then a blood culture may be ordered in addition to the synovial fluid analysis.
Joint injury, surgery, and joint replacement can increase the risk of developing an infection in a joint.
What is being tested?
Synovial fluid is a thick liquid that acts as a lubricant for the body's major joints. It is found in small quantities in the spaces between the joints, where the fluid is produced and contained by synovial membranes. Synovial fluid cushions bone ends and reduces friction during joint movement in the knees, shoulders, hips, hands, and feet.
Synovial fluid analysis consists of a group of tests that detect synovial fluid changes and may indicate the presence of diseases affecting joint structure and function. The analysis usually involves an initial basic set of tests, followed by additional tests selected based on the results of the first set of tests, the person's symptoms, and the disease that the healthcare practitioner suspects is causing the symptoms. Tests can be grouped according to:
- Physical characteristics–an evaluation of the fluid's appearance
- Chemical tests–detect changes in the fluid's chemical constituents
- Microscopic examination– cells and crystals that may be present are counted and identified by type under a microscope
- Infectious disease tests–detect and identify microbes, if present
How is the sample collected for testing?
A sample of synovial fluid is collected from the affected joint with a syringe and needle using a procedure called an arthrocentesis.
NOTE: If undergoing medical tests makes you or someone you care for anxious, embarrassed, or even difficult to manage, you might consider reading one or more of the following articles: Coping with Test Pain, Discomfort, and Anxiety, Tips on Blood Testing, Tips to Help Children through Their Medical Tests, and Tips to Help the Elderly through Their Medical Tests.
Another article, Follow That Sample, provides a glimpse at the collection and processing of a blood sample and throat culture.
Is any test preparation needed to ensure the quality of the sample?
Consult with the healthcare provider about test preparation. Synovial fluid collection and analysis may be performed after fasting or at random.
- What is arthrocentesis and how is it performed?
Arthrocentesis is the removal of synovial fluid from a joint with a needle and syringe. A healthcare practitioner applies local anesthetic and inserts the needle into the space between the bones and collects the synovial fluid.
- Are there other reasons to do an arthrocentesis?
Yes. Sometimes it will be performed to drain excess synovial fluid - to relieve pressure in the joint and/or to aid in the treatment of an infection. Sometimes medicines such as corticosteroids will be introduced into the joint to help reduce inflammation and/or to relieve pain.
© 2017 American Association for Clinical Chemistry, republished from Lab Tests Online.*
Descriptions of clinical laboratory tests were originally prepared for use on Lab Tests Online, an award-winning patient education website on clinical laboratory testing. Lab Tests Online is produced by the American Association for Clinical Chemistry (AACC), a global scientific and medical professional organization dedicated to clinical laboratory science and its application to healthcare. The Lab Tests Online website is developed in collaboration with other laboratory professional societies and is funded in part through corporate sponsorships.